IMPORTANT INSTRUCTIONS Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included. When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following: •...
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. • A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored.
Intended Use • This product is intended for temporarily heating residential rooms with an effective area coverage of 120-160 ft (11-15 m • This product is intended for household use only. It is not intended for commercial use. • This product is intended to be used in dry indoor areas only. •...
Product description Power cord with power plug Swing button Base notches Increase value button Front grill Decrease value button Control panel Display Power button Air filter Mode button Remote control Timer button Carrying handle...
Operation Positioning the product • The product can be placed in a vertical or horizontal position. • Place the product on a flat and stable surface to avoid risk of tipping it over. CAUTION Risk of fire! In case of choosing the horizontal position, place the product on the side with the base notches (B).
Page 8
Setting the mode Press the mode button (F) repeatedly to toggle between the modes: Symbol Mode Description High speed The product operates at high speed. The product operates at low speed. Low speed Fan only, no heating. The product adjusts the mode automatically according to the set ECO mode temperature to optimize energy...
Setting the timer (automatic switch on) • When the product is switched off, press the timer button (G). The starts flashing. • Keep pressing the increase (I) or decrease button (J) to set the timer. • Press the timer button again, or wait 5 seconds. The set time stops flashing.
Cleaning the filter • Press down both latches to open the cover of the air filter (L). Remove the filter. • Tap on the filter to remove the dirt. • If the filter is heavily soiled, rinse it with warm water and let it dry. •...
Love it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product. amazon.com/review/review‑your‑purchases# amazon.com/gp/help/customer/contact‑us...
Page 12
MADE IN CHINA HECHO EN CHINA FABRIQUÉ EN CHINE V05-08/19...