Table of Contents
Advertisement
Assembly
Step 3:
Hardware used: Screw E x20
•
Assemble the lower frame. Align the eyelets at the bottom of lower supports (3) with the small eyelets on the
corners of the base plate (6). Fasten the lower supports to the base plate using 12 screws (E). Attach the middle
plate (10) at the top of the lower supports using 8 screws (E).
•
The arrow sticker on the middle plate must point in the same direction as the corresponding sticker on the base
plate.
10
3
10
E
6
Advertisement
Table of Contents
