Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2015 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
(Angled Cutter sold separately)
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19e
Advertisement
Table of Contents
Related Manuals for Chicago Electric 62866
Summary of Contents for Chicago Electric 62866
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Information
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 62866... -
Page 3: Electrical Safety
Power tools are dangerous in the hands of untrained users. Item 62866 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Vibration Safety
4. Use tools with the lowest vibration when there is a choice. 5. Include vibration-free periods each day of work. Page 4 For technical questions, please call 1-888-866-5797. Item 62866... - Page 5 7. To reduce vibration, maintain the tool as safe control of it). Let the tool do the work. explained in this manual. If any abnormal vibration occurs, stop use immediately. SAVE tHESE inStruCtiOnS. Item 62866 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Grounded Tools: Tools With Three Prong Plugs
Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See 3-prong plug and Outlet.) Outlets for 2-prong plug Page 6 For technical questions, please call 1-888-866-5797. Item 62866... -
Page 7: Extension Cords
Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning n 0 xxxx/min. No Load Revolutions per Minute (RPM) Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 62866 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 6. Functions Power Switch Spindle Hex Wrench Angled Cutter (sold separately) Page 8 For technical questions, please call 1-888-866-5797. Item 62866...
-
Page 9: Tool Set Up
Cap Screw. Make sure the cupped side of the Large Washer is toward the tool. While holding the attachment over the pins on the tool, thread the Cap Screw in place. Item 62866 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Work Piece And Work Area Set Up
Store the Tool in a clean, 4. Avoid contact with foreign objects such as metal dry, safe location out of reach of children screws and nails when sanding, scraping, or cutting. and other unauthorized persons. Page 10 For technical questions, please call 1-888-866-5797. Item 62866... -
Page 11: Cleaning, Maintenance, And Lubrication
The Sanding Sheets should not be dull tool is damaged, it must be replaced or contain excessive debris build-up. only by a qualified service technician. The Angle Scraper and Cutting Blade should be clean and sharp. Item 62866 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Troubleshooting
See Extension Cords in GROUNDING section. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 12 For technical questions, please call 1-888-866-5797. Item 62866... - Page 13 If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 62866 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Please Read The Following Carefully
Tapping Screw (St4x14) Front Housing Switch Holder Gearbox Back Cover Internal Switch Screw (M4x10) Back Housing Locking Ring Tapping Screw (St4x10) Bearing (18) Tapping Screw (St4x20) Bearing (608) Power Cord Armature Page 14 For technical questions, please call 1-888-866-5797. Item 62866... -
Page 15: Assembly Diagram
Assembly Diagram Item 62866 For technical questions, please call 1-888-866-5797. Page 15... - Page 16 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.