Download Print this page

Chicago Electric 61924 Owner's Manual

1.7 horsepower 52cc gas powered

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
1.7 HORSEPOWER
52cc GAS POWERED
Using an engine indoors
CAN KILL YOU IN MINUTES.
Engine exhaust contains carbon monoxide.
This is a poison you cannot see or smell.
NEVER use inside
a home or garage,
EVEN IF doors and
windows are open.
REV 14i
When unpacking, make sure that the product is intact and undamaged.
If any equipment parts are missing or broken, please call 1-888-866-5797
as soon as possible. If any engine parts are missing or broken,
please call 1-800-520-0882 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Only use OUTSIDE
and far away from
windows, doors,
and vents.
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Email our engine support at: predator@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Advertisement

loading

Summary of Contents for Chicago Electric 61924

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2: Table Of Contents

    The emissions control system for this Engine is warranted for standards set by the U.S. Environmental Protection Agency. For warranty information, refer to the last pages of this manual. Page 2 For equipment technical questions, please call 1-888-866-5797. ITEM 61924 For engine technical questions, please call 1-800-520-0882.
  • Page 3: Safety

    It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS ITEM 61924 For equipment technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Stay clear of hot parts. 9. Industrial applications must follow 21. Do not cover the equipment during operation. OSHA requirements. Page 4 For equipment technical questions, please call 1-888-866-5797. ITEM 61924 For engine technical questions, please call 1-800-520-0882.
  • Page 5 SAVE THESE INSTRUCTIONS. ITEM 61924 For equipment technical questions, please call 1-888-866-5797. Page 5 For engine technical questions, please call 1-800-520-0882.
  • Page 6: Setup

    3. Turn the Chisel Lock 180° and release to lock the Chisel into place. Chisel Base (118) Play Chisel Flat Notch Chisel Lock (119) Figure A Page 6 For equipment technical questions, please call 1-888-866-5797. ITEM 61924 For engine technical questions, please call 1-800-520-0882.
  • Page 7 Components and Controls Choke Lever Fuel Cap Muffler Starter Handle Fuel Tank Gearbox Cover Chisel Lock Air Filter Throttle Handle Stop Button ITEM 61924 For equipment technical questions, please call 1-888-866-5797. Page 7 For engine technical questions, please call 1-800-520-0882.
  • Page 8: Operation

    Inspect the equipment and engine. b. Fill the engine with the proper amount and type of unleaded gasoline and 2-cycle oil mixture. Page 8 For equipment technical questions, please call 1-888-866-5797. ITEM 61924 For engine technical questions, please call 1-800-520-0882.
  • Page 9 Engine. IMPORTANT: Allow the engine to run at no load for two to three minutes after each start-up so that the engine can stabilize. ITEM 61924 For equipment technical questions, please call 1-888-866-5797. Page 9 For engine technical questions, please call 1-800-520-0882.
  • Page 10 Breaker Hammer with both hands. 9. Clean, then store the tool indoors 5. Set the bit against the work area. out of children’s reach. Page 10 For equipment technical questions, please call 1-888-866-5797. ITEM 61924 For engine technical questions, please call 1-800-520-0882.
  • Page 11 Press the Stop Button until the Engine stops. NOTICE Drain fuel at end of season or warranty is void. See Storage on page 15 for complete storage instructions. ITEM 61924 For equipment technical questions, please call 1-888-866-5797. Page 11 For engine technical questions, please call 1-800-520-0882.
  • Page 12: Maintenance

    Replace fuel line if necessary Service more frequently when used in dusty areas. These items should be serviced by a qualified technician. Page 12 For equipment technical questions, please call 1-888-866-5797. ITEM 61924 For engine technical questions, please call 1-800-520-0882.
  • Page 13 To prevent FIRE, do not start the engine while the smell of fuel hangs in the air. ITEM 61924 For equipment technical questions, please call 1-888-866-5797. Page 13 For engine technical questions, please call 1-800-520-0882.
  • Page 14 5. Clean the Filter and reinsert into the Fuel Tank. 6. Replace the sight glass and tighten securely. 6. Replace the Fuel Cap and tighten securely. Page 14 For equipment technical questions, please call 1-888-866-5797. ITEM 61924 For engine technical questions, please call 1-800-520-0882.
  • Page 15 Fuel Cap and tighten securely. During storage some of the gasoline in the fuel evaporates while the two-cycle oil does not, altering the gasoline-to-oil mix ratio. ITEM 61924 For equipment technical questions, please call 1-888-866-5797. Page 15 For engine technical questions, please call 1-800-520-0882.
  • Page 16: Troubleshooting

    4. Have qualified technician adjust/ mis-adjusted or stuck. repair valves and tappets. Follow all safety precautions whenever diagnosing or servicing the equipment or engine. Page 16 For equipment technical questions, please call 1-888-866-5797. ITEM 61924 For engine technical questions, please call 1-800-520-0882.
  • Page 17 2. Allow tool to operate with no load for 5 minutes before use. Follow all safety precautions whenever diagnosing or servicing the equipment or engine. ITEM 61924 For equipment technical questions, please call 1-888-866-5797. Page 17 For engine technical questions, please call 1-800-520-0882.
  • Page 18: Parts Lists And Diagrams

    Inlet Pipe Crank Case Screw M5 x 25 Gasket Gasket Oil-Seal Carburetor Bearing 6202 Filter Net Choke Lever Oil-Seal Air Cleaner Cover Page 18 For equipment technical questions, please call 1-888-866-5797. ITEM 61924 For engine technical questions, please call 1-800-520-0882.
  • Page 19 Engine Assembly Diagram ITEM 61924 For equipment technical questions, please call 1-888-866-5797. Page 19 For engine technical questions, please call 1-800-520-0882.
  • Page 20 Note: If product has no serial number, individually as replacement parts. record month and year of purchase instead. Page 20 For equipment technical questions, please call 1-888-866-5797. ITEM 61924 For engine technical questions, please call 1-800-520-0882.
  • Page 21 Machine Assembly Diagram ITEM 61924 For equipment technical questions, please call 1-888-866-5797. Page 21 For engine technical questions, please call 1-800-520-0882.
  • Page 22: Warranties

    This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Page 22 For equipment technical questions, please call 1-888-866-5797. ITEM 61924 For engine technical questions, please call 1-800-520-0882.
  • Page 23 Catalytic converter (if so equipped). Miscellaneous Items Used in Above Systems Vacuum, temperature and time sensitive valves and switches. Hoses, belts, connectors, and assemblies. ITEM 61924 For equipment technical questions, please call 1-888-866-5797. Page 23 For engine technical questions, please call 1-800-520-0882.
  • Page 24 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797...