Using The Memory Function - Omron M6 Comfort Instruction Manual

3. Using the Device

3.4 Using the Memory Function

The monitor automatically stores the results up to 100 sets for each user (1 and 2).
It can also calculate an average value based on the last 3 measurement values taken
within 10 minutes.
Notes:
• If there are only 2 measurement values in the memory for that period, the average will be based on these
2 values.
• If there is 1 measurement value in the memory for that period, this is displayed as the average.
• If the memory is full, the monitor will delete the oldest value.
• When viewing the measurement value taken without setting the date and time, "-/ - -:--" is displayed
instead of the date and time.
To View the Measurement Values Stored in Memory
1.
Select your USER ID (1 or 2).
2.
Press the
The Memory number appears for a second before the
pulse rate is displayed. The newest set is numbered "1".
Note:
The cuff wrap guide result appears on the display with the
measurement values. The cuff wrap guide lamp will not light.
3.
Press the
memory.
: To the older values
: To the more recent values
button.
or button to view the values stored in the
EN
13