Making A Call; Ending A Call - Motorola MPT1327 Quick Reference Manual

Non Keypad Radio
1. Ensure radio is in IDLE STATE.
2. Press the preprogrammed button (for zone).
You hear a positive indicator tone, indicating the radio has
switched from Zone 1 to Zone 2.
OR
You hear a negative indicator tone, indicating the radio has
switched from Zone 2 to Zone 1.

Making a Call

Full Keypad Radio
To access the contact list via the menu:
c
1. Press to enter Menu Mode.
^ v
2. Press or until Contact List.
c
3. Press to select Contact List.
^ v
4. Press or to scroll the Contact List.
c
5. Press or PTT button or
display shows Calling.
Non Keypad Radio
To make a call using the contact list:
1. Ensure radio is in IDLE STATE.
8
English
#
to make call. The
2. Turn the Channel Selector Knob to select the required
contact.
3. Press PTT button to initiate radio call. The radio sends
out its ID and sounds a tone.
4. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
5. Press PTT button to make the call.
6. Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
7. Release the PTT button to listen.
8. If there is no voice activity for a predetermined period of
time, the call ends.
OR
Press preprogrammed button (for Clear) to end a call. A
momentary tone sounds.
If a contact list number is selected but no call request is
sent, the radio is held until a momentary tone sounds and
then reverts to the IDLE STATE.

Ending a Call

Full Keypad Radio
d
1. Press .
OR
*#
press . The negative indicator tone sounds and
the display shows Call Ended.