Personality Selection - Motorola MPT1327 Quick Reference Manual

Non Keypad Radio
2. You hear a continuous tone.
3. Use the Channel Selector Knob to enter the first digit of
the password.
4. Press Side Button 1, 2 or 3 to enter each digit of the
remaining three digits of the password. You hear a
positive indicator tone for each Side Button press.
When the second digit of the password is entered, your
radio ignores any Channel Selector Knob position
change.
5. When the last digit of the four-digit password is entered,
your radio automatically checks the validity of the
password.
If the password is correct:
Your radio proceeds to power up.
OR
If the password is incorrect:
You hear a continuous tone. Repeat Steps 1 to 4.
OR
After the third incorrect password, your radio enters into
locked state. A tone sounds and the LED double blinks
yellow.
Your radio enters into locked state for 15 minutes, and
responds to inputs from On/Off/Volume Control Knob.
NOTE: The radio is unable to receive any call, including
emergency calls, in locked state.
6
English

Personality Selection

Full Keypad Radio
To select a personality via the menu, press the
programmed Personality button and proceed to Step 2.
OR
Follow the procedure below.
1. Ensure radio is in IDLE STATE.
c
2. Press to enter Menu Mode.
^ v
3. Press or until Personality.
c
4. Press to select Personality.
5. Display shows current personality e.g. MPT
^ v
6. Press or until desired personality e.g. MPT 2.
c
7. Press to select. The display shows MPT 2. The
display holds for 2 seconds while the radio re-tunes to
the new personality.
The radio returns to IDLE STATE with display showing
Freetext.