Advertisement
Quick Links
Advertisement
Related Manuals for Motorola MD207
Summary of Contents for Motorola MD207
- Page 1 MD207 Manual...
-
Page 2: Safety And General Information
Do NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects its effective range. Body-Worn Operation To maintain compliances with FCC/Health Canada RF exposure guidelines if you wear a radio on your body when transmitting always place the radio in a Motorola-supplied or... - Page 3 FCC/Health Canada RF exposure guidelines. If you do not use one of the Motorola-supplied or approved body-worn accessories and are not using the radio held in the normal use position, ensure the radio and its antenna are at least 1 inch (2.5 cm) from your body when transmitting.
-
Page 4: Safety And General Use While Driving
Medical Devices – Other If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Safety and General Use While Driving Check the laws and regulations regarding the use of radios in the area where you drive, and always obey them. -
Page 5: Fcc Licensing Information
5. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning. 6. Use of an attachment not recommended or sold by Motorola may result in a risk of fire, electric shock or personal injury. - Page 6 (3676) (225-5322) Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the IC/FCC to operate this radio and should not be made. To comply with IC/FCC requirements, transmitter adjustments should be made only by or under the...
- Page 7 Control Buttons Display Screen Guide - Battery Meter -Transmitting -Keypad Lock - Weather Alert -Receiving -Volume -Scan. - Talk Confirmation Tone -On/Off for each feature - Auto Power On/Off - Call Tone/Keypad Tone Getting Started Installing the Batteries Each radio uses 1 NiMH rechargeable battery pack or 3 AA alkaline batteries and beeps when the batteries are low.
- Page 8 3. Remove the NiMH battery pack from the clear plastic bag (do not disassemble or unwrap the battery pack). 4. Insert the NiMH battery pack with the diagram facing you. 5. Reposition the battery cover and press down to secure. Installing the Three AA Alkaline Batteries (Optional Accessory) 1.
- Page 9 Notes: • The battery icon will scroll while the battery pack is being charged. • When moving between hot and cold temperatures, do not charge the battery until the battery temperature acclimates (usually about 20 minutes). • For optimal battery life, unplug the charging adaptor within 16 hours. Do not store the radio while connected to the charger.
- Page 10 radio when you are not receiving. This allows you to adjust the volume, if necessary. You can also press to check for activity on the current channel before you talk. Push to Talk Timeout Timer To prevent accidental transmissions and save battery life, the radio emits a continuous warning tone and stops transmitting if you press for 60 continuous seconds.
- Page 11 1. Press until the code starts to flash. 2. Press to select the code. 3. Press to save the code setting or to continue set up. You can set a different code for each channel using this procedure. An extended press allows you to scroll through the Interference Code rapidly so you can quickly reach the code you want.
- Page 12 To set a call tone: 1. With the radio on, short press until the appears. The current call tone setting flashes. 2. Press to change and hear the call tone. 3. Press to set the new call tone or to continue set up. To transmit your call tone to other radios set to the same channel as your radio, press Note: Setting the call to 0 disables the call tone feature.
- Page 13 4. The screen shows 5. Press to confirm or to continue set up. Special Features Keypad Lock To avoid accidentally changing your radio settings you can lock your keypad: 1. Press and hold until displays. 2. When in lock mode, you can turn the radio on and off, receive, transmit, send a call tone, and monitor channels.
-
Page 14: Weather Receiver
and you can hear the transmission. Any Interference Eliminator Code that may be in use by that party will be detected and displayed. 4. To respond and talk to the person transmitting, press within five seconds of the end of the transmission. The radio will transmit using the newly detected Interference Eliminator Code. - Page 15 This radio can tune in to broadcasts by the United States National Oceanic and Atmospheric Administration (NOAA) Weather Radio. You can listen to a weather channel (see “Weather Channels and Frequencies” table for details) or set the radio to alert you to emergency weather broadcasts that interrupt routine broadcasts.
- Page 16 1. After turning weather reception on, press twice. ON or OFF flashes. 2. Press to select ON to activate. If you activate the Weather Alert and return to two-way mode, will display. 3. Press to save the Weather Alert setting. 4.