Table of Contents
Advertisement
68012005016-DJ
Chapter 1: General Radio Operation
1.4.3
Receiving and Responding to a Telephone Call (Trunking Only)
When and where to use:
This feature allows you to receive calls similar to standard phone calls from a landline phone.
NOTICE: With the inactivity timer enabled (optional), if there is no response to the call after the
timer expires, your radio exits the call with Menu Inactive Exit tone.
When you receive a Telephone Call, you hear a telephone-type ringing and the LED blinks green. The
display shows Phone call and the call received icon blinks.
Procedure:
1 Press the Call Response button within 20 seconds after the call indicators begin.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
3 Press the Call Response button to hang up and return to the Home screen.
You cannot initiate a Telephone Call.
1.5
Methods to Make a Radio Call
You can select a zone, channel, subscriber ID, or talkgroup by using:
•
A preprogrammed One Touch Call button.
1.5.1
Making a Private Call (Trunking Only)
Prerequisites: Your radio must be preprogrammed for you to use this feature.
Procedure:
1 Press the preprogrammed Quick Access (One-Touch) Private Call button to dial the
preprogrammed ID.
The display shows the preprogrammed ID.
2 Press the PTT button to initiate the Private Call.
3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
When you are connected, the display shows the ID of the target radio.
If no acknowledgment is received, the display shows NO ACK.
4 Press and hold the PTT button to talk. Release the PTT button to listen.
5 Press the preprogrammed Quick Access (One-Touch) Private Call button to return to the
home screen.
1.5.2
Making an Enhanced Private Call (Trunking Only)
Prerequisites: Your radio must be preprogrammed to allow you to use this feature.
40
Advertisement
Table of Contents
