Requesting A Reprogram (Trunking Only); Multiple Private Line; Selecting Multiple Private Line; Table 2: Mpl Selection Mode - Motorola SRX 2200 User Manual

7.1.3.2

Requesting a Reprogram (Trunking Only)

This feature allows you to notify the dispatcher when you want a new dynamic regrouping assignment.
Procedure:
Press the preprogrammed Reprogram Request button to send reprogram request to the dispatcher.
The display shows RPGM and PLS WAIT.
Result:
If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows ACK
RCVD and the radio returns to the Home screen.
If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-pitched
alert tone and the display shows NO ACK.
7.1.4

Multiple Private Line

Multiple Private Line (MPL) is a feature that allows user to modify the PL/DPL codes of the current mode by
selecting from a predefined list of codes. For the purpose of accessing different communication sub-groups,
repeaters and others, user no longer need to program multiple channels of the same frequency with different
PL/DPL codes.
The feature supports the following MPL selection Mode:

Table 2: MPL Selection Mode

Selection Mode
Dynamic
Static
7.1.4.1

Selecting Multiple Private Line

Prerequisites: Ensure that this feature is enabled in the codeplug and the radio is in Conventional Mode.
Procedure:
1. Perform one of the following actions:
● Press the programmable Multiple Private Line (MPL) Side button.
● From the Home screen, tap
2. Tap the required MPL.
The Radio Control Widget displays the selected MPL.
Description
The MPL List selection/functionality is automatically updated (and
active on the radio current channel) as users scroll through the avail-
able MPL List selections.
While users are scrolling through the radio available MPL List selec-
tions, MPL functionality does not change until a new MPL List is
manually selected.
More.
68012005050-FY
Chapter 7: Advanced Features
45