Motorola SURFboard SVG1202 Manual page 31

FIELD
Remote Config
Management
Multicast Enable
UPnP Enable
PassThrough Mac
Addresses
Click Apply to save changes. Click Apply to save changes. Click Apply to save changes.
SVG1202 Wireless Voice Gateway • User Guide
DESCRIPTION
Allows remote access to the SVG1202 Configuration Manager. This enables you to
configure the SVG1202 WAN by accessing the WAN IP address at Port 8080 of the
configuration manager from anywhere on the Internet. For example, in the browser URL
window, type
http://WanIPAddress:8080/ to access the SVG1202 Configuration Manager remotely. http://WanIPAddress:8080/ to access the SVG1202 Configuration Manager remotely.
Select Enable to turn on. Select Enable to turn on. Select Enable to turn on.
Allows multicast-specific traffic (denoted by a multicast specific address) to be
passed to and from the computers on the private network behind the
configuration manager.
Select Enable to turn on. Select Enable to turn on. Select Enable to turn on.
Turns on the Universal Plug and Play protocol (UPnP) agent in the configuration manager.
If you are running a CPE (client) application that requires UPnP, select this box.
Select Enable to turn on. Select Enable to turn on. Select Enable to turn on.
Specifies up to 32 computers as passthrough clients not subject to NAT, using their
MAC addresses.
To enable this feature, your cable operator may need to provide additional public
IP addresses.
B
23