Port Forwarding - D-Link DWR-921 User Manual

This allows for port to be open for incoming traffic from the internet for application which requires to be seen from the internet (ex. Opening
port 80 for your camera system for remote monitoring).
Enable Port Enable or Disable the Port Forwarding function.
Forwarding:
Local IP Address: Enter the Local IP address of the device for which the ports should
be open.
Local Port Start: Enter local port start.
Local Port End: Enter local port end.
Protocol: Select TCP, UDP or both.
Remote IP Address: Enter the remote IP address which is allowed to access the port
(Default blank or 0.0.0.0 can be used).
Remote Port Start: Enter the remote Port start.
Remote Port End: Enter the remote Port end.
Comment: Enter a Comment for the rule.
D-Link DWR-921 User Manual

Port Forwarding

Current Port Forwarding Table
This table will show all configured Port Forwarding rules.
2