Lan; Ipv4 - D-Link DWR-921 User Manual

This section will help you to change the internal network settings of your router and to configure the DHCP Server settings. After modifying any
settings, click Save & Apply to save your changes.
IP Address: Enter the IP address you want to use for the
router. The default IP address is 192.168.1.254.
Subnet Mask: Enter the Subnet Mask of the router. The default
subnet mask is 255.255.255.0.
Gateway: Enter default gateway address.
Work Mode: You can select between three different modes:
• Server – The router is default set to Server.
This will provide IP addresses to connected
devices.
• Off – Devices connected to the router will
have to manually assign an IP address.
• Client – The router will receive IP address
from connect DHCP server. (Used when
Client mode is selected under Wi-Fi).
DHCP IP Client Enter the range of IPs for the DHCP server to use
Range:
to assign IP addresses to devices on your network.
Lease Time: Enter the lease time for IP address assignments.
Static DHCP: Click this option to assign an IP address with a Mac
Address.
Domain Name: Enter the name of this router or the Domain of
your network.
802.1d Enable or Disable spanning Tree. This will switch
Spanning Tree:
off the port if a Loop is detected. (Might slow
network down if enabled).
D-Link DWR-921 User Manual

LAN

IPv4

2