Using Windows® Xp - D-Link DWR-921 User Manual

Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If
you are using another company's utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting
to a wireless network. Most utilities will have a "site survey" option similar to the Windows® XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the
centre of the bubble to access the utility.
Right-click on the wireless computer icon in your system tray (lower-
right corner next to the time). Select View Available Wireless
Networks.
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check the
TCP/IP settings for your wireless adapter. Refer to "Networking
Basics" for more information.
D-Link DWR-921 User Manual
Using Windows® XP
or
2