Connecting peripheral equipment
The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).
The EXT1 socket has audio and video inputs/outputs and RGB inputs.
The EXT2 socket has audio and video inputs/outputs and S-VHS inputs.
Video recorder
Other equipment connected to the scart
24
Video recorder (only)
Carry out the connections featured opposite. Use a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socke t ,t h e
only connection possible is via the aerial cabl e.You will therefo r e
need to tune in your video recorder's test signal and assign it
p r o g ramme number 0 (refer to manual store, p. 5 ) .
To reproduce the video recorder picture, press
Important: if your video recorder does not have A/V connections,
It will not be possible to record digital channels.
Satellite receiver, decoder, CDV, games, etc.
Carry out the connections featured opposite.
Connecting your equipment to EXT2.
To select connected equipment
X
Press the
key to select E1 (EXT1), E2 (EXT2) or E2 Y/C for
S-VHS or Hi-8 equipment
Most equipment (decoder, video recorder) carries out the switching itself.
.