Adjusting The Settings; Picture And Sound Menus - Philips 32DW6834/25 User Manual

Television 32 inch
Table of Contents

Advertisement

Adjusting the settings

To display a settings menu using the cursor keys
Press
.
SETTINGS
Use the y x keys to select an adjustment and Ï q to make that adjustment.
The red
key is used to exit from the menu displayed.
Picture menu
Sound menu
Normal
Dolby Pro Logic
Dolby 3 Stereo
Hall Surround
18
Select the
,
PICTURE
.
FEATURES
You can adjust
BRIGHTNESS
: modifies the clarity of the picture,
SHARPNESS
TINT
: adjusts the colour temperature of the picture from
(red white),
WARM
.: useful in case of poor reception to reduce the picture noise.
NOISE REDUCT
(only on certain models) :this adjustment compensates for regional
PICTURE TILT
variations in the earth's magnetic field.
You can select
SOUND MODE
.
HEADPHONE
Sound mode
This menu allows you to select the different Dolby Surround modes.
æ
Select
SOUND MODE
Â
Use the Ï q keys to select the
DOLBY 3 STEREO
For each setting, the active loudspeakers are displayed on screen.
The sound modes may also be accessed using the
NORMAL
:The left (L) and right (R) channels are reproduced on the left and
right loudspeakers of the TV set.
* (with Dolby Surround sound sources): as well as the left
DOLBY PRO LOGIC
(L) and right (R) channels, a centre channel (C) and a rear channel comprising
2 loudspeakers (S), re p roduce the Dolby Pro Logic sound.
This mode is used when a film or programme has been recorded or encoded
in Dolby Surround sound.These films or programmes are always indicated by
the symbol
(with Stereo sources): Dolby 3 Stereo sound is produced
DOLBY 3 STEREO
only on the left (L), right (R) and centre (C) channels.
HALL SURROUND
(with mono or Stereo sources):The left (L) and right (R)
channels are reproduced on the left and right loudspeakers of the TV set and
on the rear channel (S), creating a "Hall Surround" ambient effect.This mode
is recommended for broadcasts that are not encoded in Dolby Surround if
you wish to use a rear channel.
To exit from the menu
Dolby Pro Logic and Dolby 3 Stereo modes are not recommended for mono
transmissions (only the central channel is used).
Manufactured under license from Dolby Laboratories Licensing Corporation.
*
"Dolby" "Pro Logic" and the double-D symbol
or
Press
SOUND
,
,
COLOUR
CONTRAST
,
SOUND LEVEL
,
EQUALIZER
(y key) and press
,
NORMAL
DOLBY PRO LOGIC
or
sound modes.
HALL SURROUND
.
: Press the red
are trademarks of Dolby Laboratories Licensing Corporation.
.The menu appears.
and :
COOL
(blue white) to
,
SPATIAL
and
.
,
key on the remote control.
key.

Advertisement

Table of Contents
loading

This manual is also suitable for:

28dw6734/2528dw673432dw6834

Table of Contents