Advertisement
6. When fixing the adjustable board to block shield, the
locknut should be put directly on positong of the sign of
"
OPEN .
"
Remark: Stir pole shall remain level.
6.
7. Fix the adjustable board on the wall by tightening the
locknut as shown in the illustration. And the locknut should
be directly put on the position of the sign of LOCK . (Signs
are marked on the adjustable board, please refer to the
indications in installation)
7.
LOCK
)
8. Install the cover as shown in the illustration. Put the lock on
the cover directly on the reversed lock on adjustable board,
then push the cover and lock it. The installation shall begin
from bottom to top.
8.
1206284-T01-A
OPEN
"
"
(
Block
Shield
Locknut
Locknut
Lock
-5-
Adjustable Board
Stir Pole
Adjustable Board
Adjustable Board
Cover
Reversed Lock
Advertisement
