device.
•
Clogged water filter
•
Crimps or kinks in the water hose
the hose straight and kink-free.
Motor runs but does not pressurize
► Allow the pump, water hose or
•
Freezing
accessory to defrost.
•
Water not reaching the devices inlet
the device to the water supply.
► Clean the filter.
•
Filter clogging
► Clean the nozzle
•
Nozzle clogging
Weak but continuous water stream
► Replace the nozzle.
•
Worn nozzle
•
Worn on/Off valve
grip quickly 5 times in a row
Caution: Some accessories use a weak
water stream, in such cases no action is
required.
Spontaneous device startup
•
Leakage in the pump or nozzle pistol grip
Contact an IVT Service Center
Device leakage
•
Leakage in the pump
per minute is acceptable. In case of greater leakage,
please contact an IVT Service Center.
If the problem cannot be solved on the basis of
the information above, please contact local repair
shop.
Environmental protection
Recycle raw materials instead of disposing
as waste.
Machine, accessories and packaging should be
sorted for environment-friendly recycling.
Plastic components are labelled for categorized
recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
► Clean the water filter.
► Lay down
► Connect
► Press the lever of the pistol
► Discharge of 6 drops
Manual instruction | High pressure cleaner
►
9
EN