Documents; Safety Instructions; Warranty; Storage Of Equipment - Carrier 50CO Series Installation, Operation And Maintenance Instructions

2 - RECEIPT OF GOODS

2.3 - Documents

The following documents should be inside the unit:
Instruction manual.
-
Control manual.
-
Unit wiring diagram
-
Key to the wiring diagram.
-
Dimensional drawing with connection diagram
-
Additional diagrams depending on options.
-

3 - SAFETY INSTRUCTIONS

Warning
The unit must be installed and maintained by a qualified, experienced technician. Follow the operating precau-
tions to the letter when working on the unit.
Labels have been placed on the unit to remind you of the safety instructions.
As a general rule, follow all applicable safety regulations and standards.

4 - WARRANTY

See the general terms and conditions of sale

5 - STORAGE OF EQUIPMENT

The unit must be stored in a dry, sealed area, away from moisture and frost. The temperature in this area must not exceed 50°C.

6 - HANDLING

The unit must be handled either with a pallet truck or using a spreader beam and slings. This operation must be carried out by qualified
personnel. Refer to the information given on the relevant label on the unit.
Important: The unit must be handled with care and kept upright.
In all cases, the unit must be raised by its base.
4
Appropriate PPE (personal protection
is required for any servicing operations on the units
Handling with a pallet truck
equipment)