Outer Engine Mount Tube Installation; Engine Mount Arm Assembly Installation - Peco 05721201 Operator's Manual

2-5 Outer Engine Mount Tube
Installation
Secure the outer engine mount tube P#(B3727) to the
rear frame bracket using (2) 3/8"-16 x 3" u-bolts
P#(K1432) and (4) 3/8"-16 nylon flange locknuts
P#(K2038). Note: Leave the hardware finger tight until
the engine blower blade assembly has been installed.
Refer to Figure 2-6.
Figure 2-6
Outer Engine
Mount Tube
(2) 3/8"-16 x 3"
U-Bolts
2-6 Engine Mount Arm Assembly
Installation
Insert the engine mount arm assembly P#(A0274) into
the outer engine mount tube and secure with (1) detent
pin P#(J0248). Refer to Figure 2-6.
Engine Mount
Arm Assembly
8
(4) 3/8"-16
Locknuts
Detent
Pin