Rear Frame Bracket Installation; Muffler Guard Bracket Installation - Peco 05721201 Operator's Manual

2-3 Rear Frame Bracket Installation

Attach the rear frame bracket P#(B0803) to the left and
right frame bracket using (2) 3/8"-16 x 1" HHCS
P#(K1191) and (2) 3/8"-16 nylon flange locknuts
P#(K2038). Refer to Figure 2-4.
Figure 2-4
Rear Frame
Bracket
(2) 3/8"-16 x 1"
Hex Bolts
(2) 1/4"-20 x 3/4"
Hex Bolts
Left Frame
Bracket
(2) 1/4"-20
Locknuts
7

2-4 Muffler Guard Bracket Installation

Attach (2) muffler guard brackets P#(B0806) to the rear
frame bracket using (1) 1/4"-20 x 3/4" HHCS P#(K1222)
and (1) 1/4"-20 nylon flange locknut P#(K2014) PER
BRACKET. Leave the hardware finger tight.
Secure both muffler guard brackets to the existing
muffler guard, using (1) 1/4"-20 x 3/4" HHCS P#(K1222)
and (1) 1/4"-20 nylon flange locknut P#(K2014) PER
BRACKET. Tighten all hardware at this time. Refer to
Figure 2-4.
(2) 1/4"-20
Locknuts
Muffler
Guard
(2) 1/4"-20 x 3/4"
Hex Bolts
(2) Muffler Guard
Brackets
(2) 3/8"-16
Locknuts
Right Frame
Bracket