Hmi Or Es Via Ethernet (External Access) - Siemens SIMOTION P350-3 Manual

Description
2.4 HMI and SIMOTION SCOUT
2.4.3

HMI or ES via Ethernet (external access)

A complex interconnection with several HMI/ESs is only possible using an Ethernet
communication. This allows both an external HMI/ES to access several SIMOTION devices
and a SIMOTION device to access another one (to display production data, for example).
Figure 2-5
Using Ethernet, several services are possible on a SIMOTION device:
● HMI software
● SIMOTION SCOUT Engineering Software
● SIMOTION IT
Note
Further details are contained in the
Function
22
Model: Networking via Ethernet
ProTool/Pro, WinCC flexible or OPC server can use Ethernet to access one or a number
of SIMOTION devices.
SIMOTION SCOUT can also use Ethernet to access one or a number of SIMOTION
devices.
The SIMOTION devices support communication with standard IT protocols (HTTP) over
the integrated Ethernet interface. This makes it possible to use intranet/Internet from any
location to access data or diagnostic information in the SIMOTION devices.
manual.
SIMOTION IT Ethernet-based HMI and Diagnostic
SIMOTION P350-3 and Panels
Manual, 05/2009