Operating Commands - Bosch ICP-SOL2-P Quick Reference Manual

Control Panel
3

Operating Commands

The system supports programmable 1- 4- digit Installer and User Code to execute the
following operating commands.
Notice!
No identical User Codes are allowed. User Codes are not permitted to be the same as
Installer codes.
Description
Arm in AWAY Mode
Arm in STAY Mode 1
Arm in STAY Mode 2
Disarm in AWAY Mode
Disarm in STAY Mode 1
Disarm in STAY Mode 2
Add/Delete RF Devices
Add/Delete RF Keyfob/
Repeater (ICON codepad only)
Set First Test Report
Add/Delete User Code/RF
Keyfob
Change Domestic Telephone
Numbers
Change Telco Arm/Disarm
Sequence
Set STAY Mode 2 Zones
Turn Outputs On/Off
Bosch Security Systems, Inc.
Command (Default User Code =
2580
Default Inst. Code = 1234)
[Code] + [#]
[Code] + [0] + [#] (arm all areas)
Long press [#]
[Code] + [*]
Long press [*]
Long press [0]
[Code] + [#] or [Code] + [*]
[Code] + [0] + [#] (disarm all areas)
Long press [#] (only if no alarm)
[Code] + [#] or [Code] + [*]
[Code] + [0] + [#] (disarm all areas)
Long press [*] (only if no alarm)
[Code] + [#] or [Code] + [*]
[Code] + [0] + [#] (disarm all areas)
Long press [0] (only if no alarm)
[Code] + [0] + [#]
[Code] + [0] + [#]
[Code] + [1] + [#]
[Code] + [1] + [#]
[Code] + [2] + [#]
[Code] + [3] + [#]
[Code] + [4] + [#]
[Code] + [5] + [#]
Quick Reference Guide
Operating Commands | en
Installer User Code with
Code Authority
Levels
√
√
√
√
√
√
√
√
√
√
√
√
√
√ √
√ √
√ √
√
2014.06 | 02 | F01U298027
11