Table of Contents
Advertisement
AIR BOX INSTALLATION
10.
A.
Remove the two return air grills and
filters which are shipped loose in the air
box. (FIG. 10.A)
B.
Slide the front end of the air box over
the shafts of the thermostats and selector
switch. (FIG. I0.B)
FIG. 10.B.
Install the four screws through legs in air
C.
box into the prepunched holes in the
ceiling template.
optional
mounting holes for which no
screws are provided. (FIG. 1O.C)
D.
Install the return air grills and filters by
simply pushing them into place.
10.D)
Install the two knobs provided on the ends
E.
of
the
thermostat
shafts.
FIG. lOC., D., E.
NOTE:
There are three
(FIG.
and selector
switch
F.
The power supply to the air conditioner
may now be turned ON.
G.
Your air conditioner is now installed and
ready for operation.
following instructions before attempting to
run the unit.
11. OPERATING INSTRUCTIONS
(Refer to FIG. 7)
A.
CONTROLS
The Thermostat has a temperature
1.
range of 185°C in Cool ( @ ) position
to 32.5"C in Warm ( $@) position. The
thermostat controls the unit compressor
ON and OFF cycle in the cooling
mode and the electric heater ON and
OFF
cycle in the heating mode.
The Selector Switch controls the unit
2.
fan speeds, and the heating, cooling
and fan modes of operation.
10 -
Please read the
FIG. ll.A.1
FIG. 11 .A.2
Advertisement
Table of Contents
