Basic SoftIPT Functions
Start the SoftIPT
Double-click the SoftIPT icon on your desktop.
Making a Call
To make a call
Speaker
1. Click
2. When connected to a call, you can select any of the call buttons, such as
Hold
or
Speaker
3. Click
Note
Do not use BGM (#490) on the SoftIPT. It conflicts with incoming calls.
To make a Call using a USB Handset
To install a USB handset, refer to the vendor's documentation and/or website.
1. Go off-hook (pick up the receiver or press the hookswitch button on the USB
Handset) to get dial tone.
2. Dial the phone number - click the on-screen dial pad buttons, input numbers
(asterisk key, pound key) from PC keyboard, or use the key pad on the USB
handset, if available.
3. To end the call, go on-hook (put down the receiver or press the hookswitch button).
Strata CIX IP5000-series Telephone UG
then select the on-screen dial pad buttons to dial a call.
Conf
.
to end the call.
04/09
SoftIPT
Basic SoftIPT Functions
Redial
,
39