Setting The Ip Telephone Headset Transmit Volume; Viewing Ip Telephone Terminal Information - Toshiba Strata CIX IP5000-UG-VB User Manual

Administrator Programming

Setting the IP Telephone Headset Transmit Volume

Setting the IP Telephone Headset Transmit
Volume
1. Press
2. Press
3. Press
4. Press the Feature Buttons to turn the LEDs On/Off for the desired volume
transmission level (see
Table 19 Volume Level Transmitted from Headset Microphone
FB3
ON
ON
ON
ON
OFF
OFF
OFF
OFF
5. Press FB4 for headset voice output in speakerphone mode (LED On = with, LED
Off = without).
6. Press
7. Go off-hook and hang up.

Viewing IP Telephone Terminal Information

1. Press
2. Press
3. Press
only).
4. Press
5. Lift the handset off-hook / on-hook to save the settings.
Note FB03 will display the Regional Code (default 0); FB04 will display the
connecting IPU address.
130
3 6 9 Hold
+ + + (simultaneously).
#
.
Hold
Table
LEDS
FB2 FB1
ON ON
ON OFF
OFF ON
OFF OFF
ON ON
ON OFF
OFF ON
OFF OFF
Hold
to set the above data.
3 6 9 Hold
+ + + (simultaneously).
1 Hold
, then press .
FB1
to view IPT firmware version (application and boot versions, read
FB2
to view IPT MAC address (read only).
19).
Transmit Level
Level 7 (min.)
Level 6
Level 5
Level 4
Level 3 (initial value)
Level 2
Level 1
Level 0 (max.)
Strata CIX IP5000-series Telephone UG 04/09