Administrator Programming
IP5131-SDL Settings
Initialize
Select Configuration > Initialize. The Initialize screen
displays.
The general operation on the Initialize screens is as
follows:
• To view details of an item displayed on the screens
above, press the soft key that corresponds to that item.
• You can toggle between all the items found on the
Initialize screen, except All Data. The item selected is
underlined.
• Selecting the All Data soft key selects all the items displayed on the Initialize
screen and all items are underlined.
Important!
• Pressing the EXEC soft key while "Network" is displayed underlined will initialize
the selected item and will rewrite the NV-RAM data and cause the screen to move
to the Resetting Selection Screen. (The Resetting Selection Screen will be
described later.)
• Pressing the EXEC soft key any item except "Network" is displayed underlined
will rewrite the NV-RAM data and go to the Configuration screen.
• If no setting change is made to the items and the EXEC key is pressed, the NV-
RAM data will not be rewritten and goes to the Configuration screen.
• Pressing the CANCEL soft key will not initialize and goes to the Configuration
screen.
•
Table 20 on page 136
168
Pressing the "All Data" key twice will not cancel the selection.
shows the Initial values of Settings:
Initialize
All Data
Network
Sound
Browser
[Exec]
Strata CIX IP5000-series Telephone UG
LCD
Key Repeat
Others
Factory
[Cancel]
Config
04/09