Toshiba Strata CIX IP5000-UG-VB User Manual page 153

I
TEM
Advance
Sound
Others
Key Repeat
Net Diag
Factory Settings
Initialize
Reset
Saving Changes
Strata CIX IP5000-series Telephone UG
I D
NFORMATION ISPLAY
Page 1:Displays or sets the Primary Name Server, the
Secondary Name Server, GRQ Port, RRQ Port, and AP Address
Page 2:Displays or sets the Admin address upper and lower
bound, the User ID and password, as well as the Dynamic Port
Base.
Page 3:Displays or sets the VLAN Setting, PC Port type and PC
Port VLAN ID.
Page 1:Displays settings for Keybeep, Roam Noise, Handset
BOV, and Carbon Handset and Carbon Headset.
Page 2:Displays or sets the Headset and Handset Control
Modes as well as the Transmit and Receiver levels.
Page 3:Displays or sets the Sidetone Mode and Volume.
Displays or sets the Language, Input times and Backlight
settings.
Displays or sets the Key Repeat settings including the Delay
Timer and Repeat Rate.
Displays an option for a Loop Back Test.
Displays ADM/Debug Mode, Display / Key Test and Display
Mode.
Displays or resets the following settings: all Data, Network,
Sound, Browser, LCD, Key Repeat, Others, Factory.
Displays an option to Reset the IP phone.
When Changes are made throughout the IP Configurations
menus, the Set softkey saves the setting. Press Set until the IP
Configurations screen is displayed then press Reset softkey to
reboot the phone to apply the settings.
04/09
Administrator Programming
IP5131-SDL Settings
135