Ip5131-Sdl Settings; Configurations - Toshiba Strata CIX IP5000-UG-VB User Manual

Administrator Programming

IP5131-SDL Settings

IP5131-SDL Settings
This section contains instructions to configure the IP5131-SDL telephone. All
instructions found in this section pertain to the items found in the IP Configurations
screen of the IP5131-SDL telephone.

Configurations


Press
Configurations main screen.

To access any of the screens that relate to an item on
the Configurations screen

Press the soft key that corresponds to the item. The
details pertaining to that item display.
Note The following table explains each of the items
displayed on the Configurations screen.
I
TEM
Term Info
Network
134
Hold 3 6 9
+ + + (simultaneously) to display the IP
I
NFORMATION
Displays the Software Version, the MAC address, the Regional
Code and xIPU address. You can press the EXIT soft key to go
back to the IP Configurations screen.
Note This screen is for display only and you cannot make any
Page 1:Displays or sets the DHCP, IP Address, Subnet, the
default gateway, station information and LIPU Address.
Page 2:Displays or sets node, IPU Mode, Primary IPU,
Secondary IPU and Port Settings.
Page 3:Displays or sets Auto Login Mode and Auto Login
password.
D
ISPLAY
changes to the settings.
Strata CIX IP5000-series Telephone UG
IP Configurations
Term Info Key Repeat
Network Net Diag
Advance Factory
Sound Initialize
Others
Reset
Config
04/09