Adjusting The Audio Quality; Using The Stablesound ® Feature - Toshiba REGZA 42LX177 Owner's Manual

To listen to a second audio program on an analog
station (if available):
Select SAP in step 3 on the previous page.
Note:
• A second audio program (SAP) can be heard only on those
TV stations that offer it. For example, a station might
broadcast another language as a second audio program. If
you have SAP on, you will see the current program on the
screen but hear the other language instead of the program's
normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station's normal
audio will be output. However, occasionally there is no
sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
Press Y and open the Audio menu.
1
Highlight Audio Settings and press T.
2
3
Press b or B to highlight the item you want to adjust
(Bass, Treble, or Balance).
Audio Settings
Bass
Treble
Balance
StableSound
Reset
4
Press C or c to adjust the level.
• C makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
• c makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
To save the new settings, highlight Done and press T.
5
To reset the settings to the factory defaults, highlight
Reset and press T.
Chapter 6: Using the TV's features
100
100
0
Off
Done
Using the StableSound
The StableSound ® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
To turn on the StableSound
Press Y and open the Audio menu.
1
Highlight Audio Settings and press T.
2
3
In the StableSound field, select On.
Audio Settings
Bass
Treble
Balance
StableSound
Reset
To save the new settings, highlight Done and press T.
4
To revert to the factory defaults, highlight Reset and
press T.
Note: The RESET function returns your audio adjustments
to the following factory settings:
Bass . . . . . . . . center (50)
Treble . . . . . . center (50)
Balance . . . . . center (0)
StableSound . . Off
To turn off the StableSound feature:
Select Off in step 3 above.
® feature
feature:
®
100
100
0
On
Done
65