CE-Link Player Control menu functions:
Press C and open the THINC Applications menu.
1
2
Press B or b to highlight CE-Link Player Control and
press T.
THINC Applications
CE-Link Player Control
Picture Viewer
Audio Player
Personal E-mail
Channel Browser
Favorites Browser
3
Press B or b to select the item you want to control and
press T.
CE-Link Player Control
Recorder
Top Menu
Contents Menu
Navigate
ENTER
– POWER turns the selected device on and off.
– Top Menu accesses the top menu of a DVD.
– Menu accesses the menu of a DVD.
– Contents Menu accesses the contents list when you
press T. At this time, the CE-Link Player Control
menu will disappear.
Note:
• These functions depend on the devices that are connected.
• The CE-Link Player Control item will be grayed out in the
following conditions:
- A non-HDMI input is currently selected.
- The Enable CE-Link item is set to Off.
- The connected device is not a playback or recording
device.
74
Chapter 6: Using the TV's features
CB
Power
Menu
Select
Exit
EXIT
CE-Link input source selection
If a CE-Link device with HDMI switching capability (e.g.
Audio Receiver) is connected to the HDMI input, you can
select another CE-Link device that is connected to the master
HDMI device using the TV's INPUT button. See page 51 for
details.
Audio Receiver VOLUME and MUTE control
With your TV's remote control, you can adjust or mute the
sound volume of the speakers connected to the TV via an audio
receiver. First, select TV mode by pressing the TV button
under MODE SELECT on the remote control.
z Z adjust the volume level.
•
W turns off the sound.
•
Note:
• To use this function:
- Set Speaker Preference to Audio Receiver in the CE-
Link Setup menu.
- Confirm that a connected CE-Link device (such as HD
DVD player, etc) is selected for the Audio Receiver input
source.
• You can also use this function when the audio receiver is
connected to the TV's DIGITAL AUDIO OUT terminal (not
HDMI connection). In this case, select a digital audio input
mode on the Audio Receiver.
• These functions depend on the device connected.
Other CE-Link functions
When the Enable CE-Link is set to On, the following
functions can be enabled by setting them to On.
TV Auto Input Switch
•
If a connected HDMI device starts playing video or audio,
the TV will automatically switch to the appropriate HDMI
input.
TV Auto Power
•
If a CE-Link device is turned on or off, the TV turns on or
off automatically.
Device Auto Standby
•
If the TV is turned off, the TV will send a message to turn
off all of the CE-Link devices connected to the TV.
Speaker Preference
•
From this item, you can set your audio output preference to
the TV speakers or the audio receiver speakers. When this
item is set to Audio Receiver, the TV remote can be used to
adjust or mute the volume of the audio. This item will be
grayed out unless a CE-Link compatible audio receiver is
connected.
Note: When you turn on the Audio Receiver, change its input
source, or adjust the sound volume, the sound will be output
from the audio receiver's speakers even if TV Speakers has
been selected. Turn the TV off and on again to output the
sound from the TV Speakers.