Toshiba REGZA 42LX177 Owner's Manual page 13

7 PC IN — For use when connecting a personal computer.
8 ANT — Antenna input that supports analog (NTSC) and
digital (ATSC) off-air antenna signals and analog and
digital Cable TV (QAM) signals.
9 Digital Audio OUT — Optical audio output in Dolby
Digital or PCM (pulse-code modulation) format for
connecting an external Dolby Digital decoder, amplifier,
A/V receiver, or home theater system with optical audio
input.
™
10 HDMI IN — High-Definition Multimedia Interface
input receives digital audio and uncompressed digital
video from an HDMI device or uncompressed digital
video from a DVI device. Also see item 5 on previous
page. HDMI connection is necessary to receive 1080p
signals.
Chapter 1: Introduction
TV back
7 8 9 10 11 12
11 RJ-45 (Ethernet) (THINC
connecting the TV to your home network. See boxed note
below.
*THINC
(Toshiba Home Interactive Network Connection)
The RJ-45 (Ethernet) port allows your Toshiba TV to
connect to your home network. You can use this
revolutionary home entertainment networking system to
access MP3 audio files and JPEG picture files that are
stored as shared files on a networked PC and play/display
them on your TV.
You also can play your shared MP3 audio files through a
connected audio system.
Personal e-mail is also enabled with the THINC system.
See Chapter 8 for details. Also see pages 24 and 25.
12 Service port — For service use only. Used for updating
the television's firmware.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are registered trademarks
of Dolby Laboratories.
™
system*) — For
™ system
13