Remote Control Code In Service Factory Mode - Pioneer PDP-5010FD Service Manual

1

6.1.4 REMOTE CONTROL CODE IN SERVICE FACTORY MODE

A
Remote Control Keys
MUTING
j (DOWN)
i (UP)
k (LEFT)
l (RIGHT)
ENTER/SET
INPUT
INPUTxx
B
CH+/P+
CH-/P-
Numeric Keys
POWER
FACTORY
HOME MENU
VOLUME+
VOLUME-
C
DRIVE OFF (Note1)
INTEGRATOR
(Note 1) When ten seconds have passed since the [DRIVE OFF] key was pressed at the standby, it becomes invalid.
Please press [POWER] key from the [DRIVE OFF] key pressing within ten seconds when you do power supply ON while
driven OFF.
D
E
F
82
1
2
Basic Functions
Switching the main items.
Switching the subtitled items.
Switching the subtitled items.
Decreasing the adjustment value.
Increasing the adjustment value.
Switching the layers.
Selecting INPUT.
Selecting INPUT.
Increasing the channel number.
Decreasing the channel number.
Function: TV
Power OFF.
Factory OFF (Factory mode)
Factory ON (Non-Factory mode).
Menu ON.
Volume UP.
Volume DOWN.
Drive Mode OFF.
INTEGRATOR MENU ON.
PDP service PRO-1150HD
remote control PRO-950HD
2
3
Shifting to the next main item (top).
Shifting downward to the next subtitiled item.
Shifting upward to the next upper layer.
Decreasing the adjustment value.
Increasing the adjustment value.
Shifting downward or upward to the next lower or upper layer.
Shifting the INPUT to the next function.
Switching the INPUT to xx. (xx=1 to 7 etc)
Function: TV (previously selected channel number is selected)
Turning the power off.
In Factory mode, turning Factory mode off.
In Non-Factory mode, turn Fuctory mode on.
In Factory mode, turn Factory mode off.
Increasing 10 the adjustment value. (PANEL FACTORY)
Decreasing 10 the adjustment value. (PANEL FACTORY)
Turning Drive mode off.
Enter INTEGRATOR MODE.
PDP-5010FD
PDP-5010FD
3
4
Remarks
4