Electrical Field Connections - Briggs & Stratton FORTRESS Series Installation And Operation Manual

Electrical Field Connections

WARNING
Generator voltage could cause electrical shock or burn resulting in death or serious injury.
• Installation must be performed by a licensed professional.
• Disconnect all sources of electricity before installing or servicing equipment.
• Ground system before applying power.
WARNING
Hazardous Voltage - Installing low and high voltage wire in same conduit could cause electric shock or burns,
resulting in death or serious injury.
• Do not run low and high voltage wire in the same conduit unless the insulation rating on ALL wiring is rated for 600V.
See NFPA 70 for more information.
Low Voltage connections are made via a field connection terminal block (E) in the main electrical area. Compare this
illustration with your generator to familiarize yourself with the location of these connections.
19