Installing A Sata Or Sas Hard Drive - HP ProLiant ML350 Generation 4p User Manual

56 HP ProLiant ML350 Generation 4p Server User Guide
3. Determine the status of the hard drive from the hot-plug SCSI hard drive
LEDs ("Hot-Plug SCSI Hard Drive LED Combinations" on page 23, on page
22).
4. Resume normal server operations.

Installing a SATA or SAS Hard Drive

1. Remove the existing hard drive blank or hard drive from the drive bay.
2. Open the release latch to prepare the drive for installation.
NOTE: The default configuration for hot-plug SATA hard drives is bays
1 and 2 (SATA IDs 1 and 2). An optional controller is required to support
drives in bays 3 through 6 (SATA IDs 3 through 6).