General Product Features - Zenith HydroTap G4 Installation And Operating Instructions Manual

Thank you for purchasing a Zenith HydroTap. Please read and follow these instructions carefully to ensure
safe and trouble free service. If service is required, please call 1800 460 222.
What is the Zenith HydroTap ?
The Zenith HydroTaps are electronically controlled, filtered, Boiling water and Chilled water drinking systems
for kitchens and tea rooms. The HydroTap units are under bench drinking water appliances with a dispensing
tap mounted on a sink or bench, which has been designed for residential applications. These units utilise a
conventional refrigerant compressor to chill the water and an immersion heating element to boil the water.
These units dispense boiling water (factory set to 98°C) and chilled water (factory set to 6-10°C). These units
are NOT designed to be used for sanitary fixtures.
The Boiling water units are fitted with a tap mounted, child safety lock. In addition, there are various energy
saving options accessible via the main menu. Each unit is equipped with a self-calibrating program which
caters for altitude adjustment. The water filter is a disposable item which will require periodic replacement and
is covered by a limited OEM warranty.
It is important that the Installation be done safely, correctly and completely, in order to utilise all the benefits
the HydroTap can provide. The Classic and All-In-One taps may be ordered with the Tap Head Assembly for
Disabled use. The disabled levers are supplied with Braille caps for the visually impaired.
Usage:
The Zenith HydroTap is intended for use in residential household and similar applications such as, rural and
urban residential Kitchens, Hotels, Motels, Bed and Breakfast and other residential type environments.
Command centre
802253NZ - HT BC Residential Instructions 10.18 v3.00

General Product Features

Din plug
(for accessories)
ON-OFF Switch
IEC Socket
Page 5 of 28