Sound Control Adjustment; Stereo And Second Audio Program (Sap) - Toshiba 15DLV16 Owner's Manual

TV operation

Sound control adjustment/

Stereo and Second Audio Program (SAP)

Sound controls are factory preset but you can adjust them individually as follows:
The TV/DVD is equipped with a feature known as multi-channel TV sound or
MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs
with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP
which broadcasters can use to transmit a second language for bilingual
transmission or for other purposes.
Sound control adjustment
1
Press MENU and then press
"AUDIO"
2
Press or to select the item you want to
adjust, then press
MTS
Press or to select "STR" (STEREO), "SAP" or
"MONO".
BASS:
Press or to adjust the bass sound.
TREBLE:
Press or to adjust the treble sound.
BALANCE:
Press or to obtain an equal sound level from
both speakers.
SURROUND:
Press or to select "ON" or "OFF".
ON: The dynamic presence and sound created offers
a thoroughly enjoyable listening experience.
OFF: Normal sound.
3
Press CANCEL to clear the menu screen.
CANCEL
I To return BASS/TREBLE/BALANCE control
adjustments to the factory preset levels
Press or to select "RESET", then press
30
J5X00301A [E] (P26-30)
or to select
PICTURE AUDIO SETUP V-CHIP
AUDIO
MTS STEREO
BASS 25
TREBLE 25
BALANCE 00
SURROUND OFF
RESET
:SELECT :ADJUST
or to adjust the setting.
PICTURE AUDIO SETUP V-CHIP
AUDIO
MTS STEREO
BASS 25
TREBLE 25
BALANCE 00
SURROUND OFF
RESET
:SELECT :ADJUST
.
30
Listening to stereo sound
Repeat step 1 in "Sound control adjustment" on
left, then press or to select "MTS".
Then press or to select "STR".
When the TV is turned on or a channel selection is
made, the "STEREO" will appear on the screen.
This means that Stereo broadcasting is available.
You can enjoy stereo sound from the left and right
speakers.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, select "MONO".
The noise may be eliminated.
STEREO
Listening to SAP (Second Audio Program)
Repeat step 1 in "Sound control adjustment" on
left, then press or to select "MTS".
Then press or to select "SAP".
When the TV is turned on or a channel selection is
made, the "SAP" will appear on the screen.
This means that the Second Audio Program broadcasting
is available.
STEREO
SAP
16/3/06, 3:51 PM
CANCEL
/ / /
MENU