Table of Contents
Advertisement
Basic playback
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc slot when disc is
loading or unloading. Neglecting to do so may cause serious
personal injury.
DVD
Basic playback
VCD
CD
Preparations:
• When connecting to other equipment, turn the power off.
1
Press POWER on the unit or on the remote control
to turn on the unit.
The Power indicator on the front of the main unit will light.
• Every time you press POWER, the TV/DVD starts from
TV mode.
• When using an amplifier, switch on the amplifier.
2
Press TV/DVD on the remote control to select DVD
mode.
The DVD startup screen will appear on the screen.
3
Load a disc in the disc slot.
Load the disc in the disc slot with the label side facing
forward. (If the disc has a label.) Hold the disc without
touching either of its surfaces, align it with the guides,
and place it in position.
J5X00301A [E] (P31-35)
31
POWER
VOLUME
+ /–
4
On the TV-screen, "0" changes to "Reading" and then
playback commences.
• A menu screen will appear on the TV screen if
the disc has a menu feature.
Press
/
or
/
to select title, then press
ENTER. Title is selected and play commences.
Press VOLUME + or – to adjust the volume.
5
6
Press STOP to end playback.
I Resuming facility
• The unit records the stopped
point, depending on the disc.
"
" appears on the screen.
Press PLAY to resume
playback (from the scene point).
• If you press STOP again
("I" appears on the screen.),
the unit will clear the stopped
point.
I
To start playback in the stop mode
Press PLAY.
Note:
If the unit does not operate properly:
Static electricity, etc., may affect the TV/DVD's operation. In such
case, disconnect the AC cord, then connect it again.
16/3/06, 3:52 PM
PLAY STOP
EJECT
Reading
VOLUME
32
31
Advertisement
Table of Contents
