Time And Alarm Function - Kompernass KH2022 Operating Instructions Manual

Time and alarm function

The appliance can switch itself on under timed control, e.g. as an alarm func-
tion. The requirements are that the clock is correctly adjusted, an alarm time
is programmed in and the alarm function is switched on. Additionally, a
radio station should be selected and a sufficiently loud volume level be set.
a) Setting the clock
• To set the hour indicator, press and hold the button "TIME SET"
at the same time, press the button "HOUR"
• To set the minute indicator, press and hold the button "TIME SET"
at the same time, press the button "MIN"
b) Programming the alarm time
• To set the hour indicator, press and hold the button "AL.SET"
the same time, press the button "HOUR"
• To set the minute indicator, press and hold the button "AL.SET"
at the same time, press the button "MIN"
c)To switch the alarm function on or off
• Press the button "AL.ON/OFF"
display a clock symbol appears to serve as a check.
• Press again on the button "AL. ON/OFF"
off. The clock symbol disappears from the display
When all steps have been completed as described, the appliance automati-
cally issues the alarm call at the programmed time, until it switched back off.
For as long as the alarm function remains activated, the appliance will repeat
the switch on function every day. Keep this in mind if the appliance is to be
left without supervision for an extended period – if you do not, the appliance
will continue to run until your return, or until the batteries are exhausted.
.
.
.
.
to switch the alarm function on. In the
to switch the alarm function
- 8 -
and,
and,
and, at
and,
.