Advanced Playback (Dvd); Zooming; Locating Desired Scene - Toshiba MW24F11 Owner's Manual

Advanced playback (DVD)

Zooming/Locating desired scene
DVD

Zooming

VCD
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
1
Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM
(x 2.0).
2
/ / /
Press to view a different part of the
frame.
You may move the frame from the
center position to UP, DOWN, LEFT
or RIGHT direction.
3
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view (
Notes:
• You can select the Pause, Slow or Search playback in the zoom
mode.
• Some discs may not respond to zoom feature.
5T40301A [E]p44-47
1 (x 1.3), 2 (x 1.5) and 3
1
Off).
47
DVD

Locating desired scene

VCD
CD
Use the title, chapter and time recorded on the DVD disc to
locate the desired point to play back. In the case of VCD/CD
disc, time and track are used to locate the desired point to
play back.
To check the title, chapter and time, press DISPLAY.
1 Press JUMP during playback or stop mode.
Time
Title
Chapter
• "Time" only works in playback or resume
stop mode.
2
Press or to select the "Time", "Title" or
"Chapter".
Time
Title
Chapter
3 Press Number buttons (0–9) to change the
number.
Time
Title
Chapter
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video-CD playback with PBC, the JUMP does not
work. To turn off PBC, see page
3/1/05, 10:31
DISPLAY
0–9
JUMP
ENTER
/ / /
CANCEL
ZOOM
/
/6
/
/Enter/0 9/Cancel/Jump
/
/6
/
/Enter/0 9/Cancel/Jump
/
/6
12
/
/Enter/0 9/Cancel/Jump
#
.
47