Toshiba MW24F11 Owner's Manual page 17

Connecting to an amplifier equipped with a MPEG audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier
equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Amplifier equipped with an
MPEG2 audio decoder
To COAXIAL
type digital
audio input
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).
Amplifier equipped with a
Digital audio input
To COAXIAL
type digital
audio input
Notes:
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO
OUT jack of the unit.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the "COAXIAL" input of a Receiver or Processor.
• Refer to the owner's manual of the connected equipment as well.
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening
level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the unit's power cord. If you leave the amplifier power on, the
speakers may be damaged.
5T40301A [E]p13-17
75 Ω coaxial cable (not supplied)
75 Ω coaxial cable (not supplied)
17
OUT PUT LINE 1 IN
VHF/UHF
VIDEO VIDEO
DIGITAL AUDIO
L L (MONO)
COAXIAL
AUDIO AUDIO
R R
To COAXIAL DIGITAL
AUDIO OUT
VHF/UHF OUT PUT LINE 1 IN
VIDEO VIDEO
DIGITAL AUDIO
L L
(MONO)
COAXIAL
AUDIO AUDIO
R
R
To COAXIAL DIGITAL
AUDIO OUT
3/1/05, 10:15
17