Advanced Playback (Dvd); Zooming; Locating Desired Scene; Playback - Toshiba MW27H62 Owner's Manual

Advanced playback (DVD)

Zooming/Locating desired scene
DVD

Zooming

VCD
CD
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
1
Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM
(x 2.0).
2
/ / /
Press
frame.
You may move the frame from the
center position to UP, DOWN, LEFT
or RIGHT direction.
3
In the zoom mode, press ZOOM repeatedly to
return to a 1:1 view (
Notes:
• You can select the Pause, Slow or Search playback in the
zoom mode.
• Some discs may not respond to zoom feature.
54
5V60101A [E]p51-54
1 (x 1.3), 2 (x 1.5) and
1
to view a different part of the
Off).
54
DVD

Locating desired scene

VCD
CD
Use the title, chapter and time recorded on the DVD disc to
locate the desired point to playback. In the case of VCD/CD
disc, time and track are used to locate the desired point to

playback.

To check the title, chapter and time, press DISPLAY.
1 Press JUMP during playback or resume stop
mode.
3
2
Press or to select the "Time", "Title/
Track" or "Chapter".
3 Press Number buttons (0–9) to input the
number.
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
4 Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Notes:
• In case of the Audio CD and Video-CD, only Track and Time
can be selected.
• In case of the Video-CD playback with PBC, the JUMP does
not work. To turn off PBC, see page
2/22/06, 1:07 PM
DISPLAY
0–9
JUMP
ENTER
/ / /
CANCEL
ZOOM
Jump
Title
Chapter
Time
Jump
Title
Chapter
Time
Jump
Title
Chapter 12
Time
#'
.