Playback (Vcr); Loading And Unloading A Cassette Tape - Toshiba SD-V392SU2 Owner's Manual

Playback (VCR)

Loading and unloading a cassette tape

Use only video cassette tapes marked
Loading
Push the center of the tape until it is automatically
inserted.
Automatic power ON
When you insert a cassette tape the DVD/VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
1 Press EJECT on the front panel or on the Remote.
Automatic tape eject
This DVD/VCR will automatically rewind the tape when the tape has ended. Once the tape is rewound to its beginning,
the cassette tape will be ejected automatically.
To prevent accidental erasure
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Erase prevention tab
Tape speed and maximum recording time
Tape Speed
SP (Standard Play)
2-2/3 hours
SLP (Super Long Play)
J2D81001A (E)p26-31.p65
and
Screwdriver
T-160 T-120
2 hours
8 hours 6 hours
29
.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Erase prevention tab
Remove the cassette tape.
2
To record again
Cover the hole with a piece of adhesive tape.
Adhesive tape
Video cassette tape
T-90 T-60
1-1/2 hours 1 hour
4-1/2 hours 3 hours
28/5/04, 1:52 PM
EJECT
T-30
30 minutes
1-1/2 hours
29