Installing The Power-Adapter Port - Dell Inspiron 7791 2n1 Service Manual

About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the removal procedure.
Steps
1. Remove the two screws (M2.5x5) that secure the left display-hinge to the system board.
2. Open the left display hinge.
3. Disconnect the power-adapter port cable from the system board.
4. Peel the tape that secures the power-adapter port to the palm-rest and antenna assembly.
5. Remove the screw (M2x3) that secures the power-adapter port to the palm-rest and antenna assembly.
6. Lift the power-adapter port, along with its cable, off the palm-rest and antenna assembly.

Installing the power-adapter port

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the installation procedure.
28 Removing and installing components