Installing The Palm-Rest And Antenna Assembly - Dell Inspiron 7791 2n1 Service Manual

Installing the palm-rest and antenna assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the palm-rest and antenna assembly and provides a visual representation of the installation
procedure.
Steps
Place the palm-rest and antenna assembly on a clean and flat surface.
Next steps
1. Install the keyboard.
2. Install the power-button with fingerprint
3. Install the keyboard bracket.
4. Install the system board.
5. Install the I/O board.
6. Install the display assembly.
7. Install the fan.
8. Install the speakers.
9. Install the wireless card.
10. Install the coin-cell battery.
11. Install the hard drive.
12. Install the memory modules.
13. Install the battery.
14. Install the base cover.
15. Follow the procedure in
54 Removing and installing components
reader.
After working inside your computer.