Dsp Control Menu - Electro-Voice EVOLVE30M-US User Manual

18 en | Amplifier DSP
9.
Notice!
Bluetooth® is available in select countries.
Contact your nearest Electro-Voice dealer or Electro-Voice distributor for more information.
System protection
System protection limiters indicate when a system is exceeding recommended usage by
indicating CLIP or LIMIT on the LCD display.
CLIP
CLIP indicates the signal to the loudspeaker is too high, resulting in a clipped signal into the
loudspeaker. If CLIP is shown, reduce the input gain and/or the signal on the mixer or source
equipment.
LIMIT
LIMIT protects the loudspeaker from short-term peaks which can cause distortion. When
LIMIT is shown small on the screen, the limiter is active but keeps distortion under control.
The large LIMIT indicates the sound is negatively affected. Reducing the output volume
(MASTER VOL) is strongly recommended when the large limit indication is shown.
5.3

DSP control menu

DSP control menu for Basic mode
VOLUME
2019-12 | 03 | F.01U.381.064
SOLID - CONNECTED
FUNCTION indicator - Indicates whether the system is in MIXER or BASIC mode.
EXIT
FUNCTION
MODE
DELAY
SUB LEVEL
TREBLE
MID
BASS
BLUETOOTH BLUETOOTH
User manual
EVOLVE Portable Column Loudspeaker
0 dB (Default)
Mute, -80 dB +10 dB (1 dB)
Basic
Mixer
MUSIC
LIVE
SPEECH
CLUB
0 m to 100 m (.1 m)
(0 ft to 328.1ft)
0 dB (Default)
Mute, -80 dB to +10 dB (1 dB)
0 dB (Default)
-12 dB to +6 dB (1 dB)
0 dB (Default)
-12 dB to +6 dB (1 dB)
0 dB (Default)
-12 dB to +6 dB (1 dB)
ON
OFF (Default)
Electro-Voice