Electro-Voice EVOLVE30M-US User Manual page 25

EVOLVE Portable Column Loudspeaker
The default is 0 dB.
BASS Menu
The Bass menu item is used to configure the low frequencies of sound.
The range is -12 dB to +6 dB for Main system EQ. The range is -12 dB to +12 dB for INPUTS 1-7/8
in mixer mode.
The default is 0 dB.
MAIN GEQ Menu (Mixer mode)
The MAIN EQ menu is used to adjust the frequency response of the loudspeaker for different
applications or personal preference. There are 7 different EQ filters available centered at the
following frequencies: 63, 160, 400, 1.0K, 2.5K, 6.0K & 12K Hz.
The range of each filter is -12 dB to +12 dB.
The default value for each filter is 0 dB.
AUX GEQ Menu (Mixer mode)
The AUX GEQ menu is used to adjust the frequency response of the AUX OUT for different
applications or personal preference. There are 7 different EQ filters available centered at the
following frequencies: 63, 160, 400, 1.0K, 2.5K, 6.0K & 12K Hz.
The range of each filter is -12 dB to +12 dB.
The default value for each filter is 0 dB.
FX1 & FX2 Menu (Mixer mode)
The FX1 & FX2 menu is used to select the reverb, delay, chorus, or flanger preset for each FX
unit.
AUX OUT Menu (Mixer mode)
The AUX OUT menu is used to select the signal present at the AUX OUT connector:
–
–
MIX OUT Menu (Mixer mode)
The MIX OUT menu is used to select which signals should be output at MIX OUT and which
signal should be delivered by the loudspeaker.
–
–
–
BLUETOOTH Menu
Turning Bluetooth® ON or OFF
To turn Bluetooth® ON or OFF, do the following:
1.
2.
The Bluetooth menu options are ON/OFF, CONTROL PAIR, and AUDIO PAIR.
CONTROL PAIR Menu
The CONTROL PAIR menu is used to enable the QuickSmart Mobile wireless control and
monitoring application. Available options for this selection are: ON or OFF.
The default is OFF.
Electro-Voice
AUX MIX (default) - provides the signal mix controlled by the individual channel AUX
sends
MAIN MIX - provides the same signal that is present at the loudspeaker
L+R: INPUTS 1-4 and the left and right signals of INPUT 5/6 & 7/8 are summed. The sum is
output at MIX OUT and is delivered by the loudspeaker. (Default)
R: Only the right signal of INPUT 5/6 & 7/8 and the percentage of INPUTS 1-4 panned
right is output at MIX OUT. The loudspeaker will deliver only the left signal.
L: Only the left signal of INPUT 5/6 & 7/8 and the percentage of INPUTS 1-4 panned left is
output at MIX OUT. The loudspeaker will deliver only the right signal.
From the DSP menu, scroll to BLUETOOTH Menu.
Select ON.
OR
Select OFF.
User manual
Amplifier DSP | en 25
2019-12 | 03 | F.01U.381.064