Dsp Controls; Full-Range Loudspeaker Dsp Control Menu - Electro-Voice ELX200-10P-US Installation Manual

ELX200 Powered Loudspeakers
LIMIT protects the loudspeaker from short-term peaks which can cause distortion. When
LIMIT is shown small on the screen, the limiter is active but keeps distortion under control.
The large LIMIT indicates the sound is negatively affected. Reducing the output volume
(MASTER VOL) is strongly recommended when the large limit indication is shown.
5.3

DSP controls

An integrated DSP control menu allows the user to select multiple DSP system settings on the
loudspeaker.
Accessing the DSP control menu
To access the DSP controls menu, do the following:
1.
2.
3.
4.
5.
6.
7.
5.3.1

Full-Range loudspeaker DSP control menu

The full-range loudspeaker DSP control menu selections are available for the ELX200-10P,
ELX200-12P, and ELX200-15P loudspeakers.
EXIT
MODE
LOCATION
SUB
2017.06 | 01 | F.01U.326.891
QuickSmartDSP MONITOR
Push the MASTER VOL knob.
The DSP Control menu appears.
Using the MASTER VOL knob, scroll through the menu items.
Push the MASTER VOL knob to select the menu item you want to modify.
The focus moves to the parameters on the right side of the DSP menu.
Using the MASTER VOL knob, scroll through the parameters.
Push the MASTER VOL knob to confirm the selected parameter.
The setting is saved. The focus returns to the menu items on the left side of the DSP menu.
Repeat steps 2 through 5 to modify additional DSP and system settings.
Select EXIT to return to the home screen.
PUSH FOR DSP
|
MUSIC (Default)
LIVE
SPEECH
CLUB
TRIPOD (Default)
MONITOR
WALL
SUSPEND
OFF (Default)
80Hz
100Hz
Installation manual Electro-Voice