Boot Configuration; Peripheral Configuration - ECS 946GZT-M2 Manual

Boot Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Main Advanced

Boot Configuration

Numlock
Zip Emulation Type
FDD Controller
FDD Write Protect
Numlock (On)
The item selects Power-on state for Numlock.
Zip Emulation Type (FDD)
The item shows the type of zip emulation.
FDD Controller (Enabled)
The item enables or disable the floppy disk drive interface.
FDD Write Protect (Disabled)
The item enables or disable the FDD write protect function.
Press <Esc> to return to the Advanced Features page.
Peripheral Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Main Advanced

Peripheral Configuration

Serial Port A
Infrared Port
Parallel Port
Mode
Azalia
Onboard LAN Device
InsydeH2O Setup Utility
Power Security Boot
<On>
<FDD>
<Enabled>
<Disabled>
InsydeH2O Setup Utility
Power Security Boot
Configure Serial port A
using options :
[Disable] No
<Auto>
Configuration [Enable]
User Configuration
<Disabled>
[Auto] EFI/OS chooses
configuration
<Auto>
<ECP>
+ -
<Auto> Select Boot Device
<>
Selecct Screen
<Enabled>
Select Item
Select
Enter
Setup Defaults
F9 =
Save and Exit
F10 =
Esc = Exit
Using BIOS
Exit
Exit
SubMenu
29