Onboard LAN (Optional)
This motherboard may support either of the following LAN chipset:
•
Two-Wire Serial Interface (TWSI) for VPD
•
Compliant wtih PCI Express base specification 1.1
•
Compliant to 802.3x flow control
•
Supports IEEE 802.3u/ab, 802.1p and 802.1q
•
Compliant with 10/100/1000 IEEE 802.3
•
Support WOL power management and ACPI 2.0 specification
•
Two-Wire Serial Interface (TWSI) for VPD EEPROM
•
Compliant wtih PCI Express base specification 1.1a
•
Compliant to 802.3x flow control
•
Supports IEEE 802.1p and 802.1q
•
Compliant with 10/100 IEEE 802.3
•
Support WOL power management and ACPI 2.0 specification
Expansion Options
The motherboard comes with the following expansion options:
•
One PCI Express x16 slot for Graphic Interface
•
One PCI Express x1 slot
•
Two 32-bit PCI v2.3 compliant slots
•
One 40-pin IDE low profile header that support two IDE devices
•
One floppy disk drive interface
•
Four 7-pin SATA connectors
The motherboard supports UltraDMA bus mastering with transfer rates of 100/66 MB/s.
Integrated I/O
The motherboard has a full set of I/O ports and connectors:
•
Two PS/2 ports for mouse and keyboard
•
One serial port
•
One parallel port
•
One VGA port
•
Four USB ports
•
One LAN port (optional)
•
Audio jacks for microphone, line-in and line-out
BIOS Firmware
This motherboard uses Insyde BIOS that enables users to configure many system
features including the following:
•
Power management
•
Wake-up alarms
•
CPU parameters
•
CPU and memroy timing
The firmware can also be used to set parameters for different processor clock speeds.
Some hardware specifications and software items are subject to change with-
out prior notice.
Introducing the Motherboard
3